1. In the process of using the flexible sling, it is necessary to strictly check and master the overall wear and damage degree of the flexible sling. If it meets the following standards, it must be scrapped.
2. If the surface layer of the flexible sling is worn and broken, it should be scrapped.
3. The two sides of the flexible sling are partially damaged. When the serious damage and defect reach 10% of the width of the flexible sling, it must be scrapped.
4. If the worn part of the buckle is damaged or broken to 5% of its cross-sectional area, it should be scrapped.
5. In use, if the flexible sling is cut by a sharp tool, it should be scrapped when it reaches 5% of its area.
6. Wear reduction rate of flexible sling cross section area (%)
Damage degree
Rated load
(standard)
3%
5%
7%
10%
Lifting weight
100%
90%
80%
50%
Scrap
Please strictly refer to the above standards to ensure safe use.
Taizhou Kunda lifting equipment Co., Ltd
|
|
